SAP Function Module search on CN_C
Search FMs
CNACL_ACL_ACTIVATION_CHECK - Check if ACL is active in Customizing
CNACL_ACTIVATION_CHECK_INT - Check if ACL is active in Customizing
CNACL_ADD_NODE - Add node to ACL for Inheritance
CNACL_CHANGE_NET_ASSIGN - Chance the inherited ACLs for Network and activities
CNACL_CHECK_ADMIN - Check if the user is admin for object
CNACL_CHECK_CREATE_EXISTS - Checks if Create checkbox is enabled
CNACL_CHECK_DATA_CHANGED - CHECK if some data was changed for an object type
CNACL_CHECK_NET_PROFILE - Check the Network Profile
CNACL_CHECK_PROJ_PROFILE - check the Project Profile
CNACL_CHECK_SWITCH - Check if the Switch is active.
CNACL_DELETE_OBJECT - Get the deleted ACL records
CNACL_DEL_ADD_ACL - Delete acl rights and add new
CNACL_EDIT_MODE_SET - Set the edit mode of the screen
CNACL_GET_ADDITIAL_AUTH - Function to get the ACL Auth for Create
CNACL_INSERT_PROJ_TM - Replace the PSPID of project with TM No.
CNACL_NUMBERSWITCH - Switch Temp OBJNRs to Permanent OBJNRs
CNACL_PRE_SAVE - Pre process for saving ACL rights
CNACL_SAVE_ACT - Save Acl Data for PS Activities
CNACL_SAVE_NET - Save Acl Data for PS Network
CNACL_SAVE_PROJ - Save Acl Data for PS PROJ
CNACL_SAVE_PRPS - Save Acl Data for PS WBS
CNACL_SET_OBJNR - Set Object Number and initial data
CNACL_SHLP_EXIT_ORGUNIT - Saerch Help exit for Org. Unit.
CNACL_USER_RIGHTS_GET - Get the rights of teh user for an object
CNECP_MAINTAIN - RFC for maintaining ECP for a project
CNECP_READ - RFC for reading the ECP
CNFCRMPR_ACCESS - Access
CNFCRMPR_REQ_CHECK - Check Conditions
CNFCRM_REFRESH - Initialization
CNVCDMCCA_GET_PROJECTID - Get Clearing Analysis Project IDs
CNVCDMCCA_GET_USAGE_DATA - Get Usage Data for Clearing Analysis Project
CNVCDMCCA_VAL_PROJECTID - Validate Clearing Analysis Project(for SCWB)
CNVCDMCCTS_DELETE_ADHOC_STATE - Dlete the entries from state table for adhoc project only
CNVCDMCCTS_SHOW_REQ_TASKS - Show Requests/Tasks for Dispaly Analysis
CNVCDMCCTS_TRINT_SELECT_REQUES - Selection of Requests
CNVCDMCUCIA_GET_OBJS_PIECELIST - CDMC: Get objects for picelist
CNVCDMC_OBJECT_EXISTENCE_CHECK - CDMC : Function to check the existence of an object
CNVCDMC_STORE_BPCA_INFORMATION - CDMC: Updates the Proj Heirarchy and the TBOM info into CDMC relevant tabs
CNVCF_AUTH_SWITCH - FM for authorization switch
CNVCF_BASE_CK - Init of basic functions
CNVCF_BASE_MACRO_SWITCH - Activate macros for system release
CNVCF_CCE_ACTIVE_GET - Returns the active comparison run
CNVCF_CCE_CHECKED_FILLED - check via RFC, if table is filled
CNVCF_CCE_CHECKSUM - creates checksum
CNVCF_CCE_CHECK_USED - Check usage of domain value
CNVCF_CCE_COUNT_ENTRIES - counts number of records via RFC
CNVCF_CCE_GET_APPLICATION_COMP - Get application components from participating systems
CNVCF_CCE_LIST_DOWNLOAD_HTML - Download to HTML
CNVCF_CCE_RFC_READ_FROM_BCK - read table from backup via RFC
CNVCF_CCE_RFC_READ_TABLE - External access to R/3 tables via RFC
CNVCF_CCE_RFC_READ_TABLE_2 - External access to R/3 tables via RFC
CNVCF_CCE_RFC_READ_TABLE_TMP - External access to R/3 tables via RFC
CNVCF_CCE_RFC_READ_TABLE_UNI - External access to R/3 tables via RFC
CNVCF_CCE_TAB_GET_FIELDS - determines fields of a table
CNVCF_COMP_FOR_DEVC - Komponente zur Entwicklungsklasse
CNVCF_COMP_FOR_TABLE - Liefert Komponente zur Tabelle
CNVCF_COMP_TEXT - Liefert Kurztext zur Komponente
CNVCF_DATE0 - Kurzform erstellen
CNVCF_DATE1 - Kurzform erstellen
CNVCF_DATE_C2N - c2n
CNVCF_DATE_N2C - n2c
CNVCF_DATE_TO_DAY - Tag ermitteln
CNVCF_DB_TABTEXT - Text zur Tabelle
CNVCF_DEVC_FOR_TABLE - Liefert Entwicklungsklasse der Tabelle
CNVCF_DEVC_TEXT - Liefert Text zur Entwicklungsklasse
CNVCF_DOWNLOAD - File download
CNVCF_DOWNLOAD_ICON - Download single SAP icon to local .gif file
CNVCF_DOWNLOAD_ICONS - Download SAP icons to local .gif files
CNVCF_DOWNLOAD_VORLAGE - File download
CNVCF_DYN_CREATE_TABLE - Dynamically create internal table
CNVCF_GET_FILEEXT - Get extension from file name
CNVCF_GET_FILENAME - Get name from file name
CNVCF_GET_FILEPATH - Get path from filename
CNVCF_HEX_COLS_ADD - Add column
CNVCF_HEX_COLS_CLEAR - Clear column list
CNVCF_HEX_COL_ADD - Add column
CNVCF_HEX_DATA - data body
CNVCF_HEX_DOWNLOAD - download
CNVCF_HEX_FINISH - finish output
CNVCF_HEX_HEADLINE - output of headline
CNVCF_HEX_OUTPUT - Output
CNVCF_HEX_SAVE - download
CNVCF_HEX_SAVE_SERVER - download
CNVCF_HEX_START - Start output
CNVCF_HEX_SUBHEADLINE - subheadline
CNVCF_HEX_TABLE_CELL_CLOSE - cloce cell
CNVCF_HEX_TABLE_CELL_OPEN - open cell
CNVCF_HEX_TABLE_CELL_OPEN_HEAD - headline cell open
CNVCF_HEX_TABLE_CELL_OPEN_SUBH - subheadline
CNVCF_HEX_TABLE_CELL_OPEN_SUM - headline cell open
CNVCF_HEX_TABLE_LINE_CLOSE - close row
CNVCF_HEX_TABLE_LINE_OPEN - Start row
CNVCF_INT_DL_PC46X - File download
CNVCF_INT_DL_SR46X - File download
CNVCF_JSTAT_CHECK_STATUS - Job-Status überprüfen
CNVCF_JSTAT_GETINFO - Get info for job
CNVCF_JSTAT_REPEAT - Job erneut einplanen
CNVCF_JSTAT_UP - JSTAT
CNVCF_LIC_PUT - Store license
CNVCF_LOG_START - Log starten
CNVCF_POPUP_FILENAME_LOAD - Ask for a filename
CNVCF_POPUP_FILENAME_SAVE - Ask for a filename
CNVCF_PROGRAM_INIT - Start a program
CNVCF_PROGRAM_READ - copy of RPY_PROGRAM_READ from IDT
CNVCF_PROGRESS - Progress indicator
CNVCF_QUESTION - Ja / Nein - Frage
CNVCF_QUESTION_3BUTTONS - Ja / Nein - Frage
CNVCF_SCNG_COMPARE - Object comparison
CNVCF_SCNG_GETDEP - Determines dep. object type
CNVCF_SCNG_GET_PARAMETERS - Get the run ID as parameter set
CNVCF_SCNG_GET_SUBOBJTYPE - Get Sub Object Types
CNVCF_SCNG_OBJID_GETMAX - Get max objid
CNVCF_SCNG_RUNID_ACTIVATE - Get active run
CNVCF_SCNG_RUNID_GETACTIVE - Get active run
CNVCF_SCNR_FIND_APPL - Find Application for a Number Range Object
CNVCF_SCNR_READ_NRIV - Read records from table NRIV
CNVCF_SCNR_READ_NR_TABLES - Read records from tables NRIV, TNRO, TNROT based on limitation
CNVCF_SCNR_READ_TNRO - Read records from table TNRO
CNVCF_SCNR_READ_TNROT - Read records from table TNROT
CNVCF_SCOL_ATTR_EXAMPLE - Copy template for attribute user exit
CNVCF_SCOL_CHECKSUM_CALC - berechne Checksumme
CNVCF_SCOL_CHECKSUM_CODE_BODY - Checksum for codebody
CNVCF_SCOL_CHECKSUM_VERSIONS - Calculates checksums for different versions nos
CNVCF_SCOL_CHECK_TRQ - Ist ein TRQ relevant?
CNVCF_SCOL_GETATTR - Wrapper Getdetail
CNVCF_SCOL_GETDEF - Wrapper Get definition
CNVCF_SCOL_GETDEP - Wrapper Get definition
CNVCF_SCOL_GETDETAIL - Wrapper Getdetail
CNVCF_SCOL_GETLIST - Wrapper Getlist
CNVCF_SCOL_OBJLIST - Liste installierter Objekttypen
CNVCF_SCOL_OBJTYPE_INSTALLED - Check: is objecttype installed?
CNVCF_SCOL_SEND_OR - ZSCD_SCWB_OR verteilen
CNVCF_SCOL_SEND_RUNID - ZSCD_SCWB_OR verteilen
CNVCF_SCOL_USEREXIT_INFO - Check: is standard include a user exit
CNVCF_SCWB - Get current system update status
CNVCF_SCWB_ABAP_READ - Read ABAP source code
CNVCF_SCWB_AFTER_COMPARE - Actions after object comparison
CNVCF_SCWB_AFTER_COMPARE_OLD - Actions after object comparison
CNVCF_SCWB_CCE_TABPOOL_GET - Get objects for CCE table pool also from satelites
CNVCF_SCWB_CCE_TABPOOL_GET_N - Get objects for CCE table pool also from satelites
CNVCF_SCWB_CHECK_RUNID - Check RUNID for validity
CNVCF_SCWB_CHECK_TASK - Check runned tasks
CNVCF_SCWB_CLEAR_RUN - Clear runid on satellites
CNVCF_SCWB_FIND_TRQ - Look for list of transport requests
CNVCF_SCWB_FUNCTION_EXISTS - Check existence of a specific function module
CNVCF_SCWB_GAIN_OBJL - Gain object list on base of Transport Requests
CNVCF_SCWB_GAV_READ - Get nbr of attribvutes per object type
CNVCF_SCWB_GAV_SET - Set attribute value - customer specific global attributes
CNVCF_SCWB_GA_COUNT - Get nbr of attribvutes per object type
CNVCF_SCWB_GETDEP -
CNVCF_SCWB_GET_CODEPAGES - Get list of codepages
CNVCF_SCWB_GET_DOMAIN_VALUES - Festwerten einer Domäne auslesen
CNVCF_SCWB_GET_RFC - Get the RFC destinations from PCL
CNVCF_SCWB_GET_SYSID - Return System ID
CNVCF_SCWB_GET_TRQ - Get the list of transport request
CNVCF_SCWB_GET_USERTYPE - AOF: Get Usertype (USR02) in target system
CNVCF_SCWB_JOB_RELEASE - Release of background job (remote enabled)
CNVCF_SCWB_JSTAT_CHECK - Check if jobs are finished
CNVCF_SCWB_LANG_GET - Get installed languages
CNVCF_SCWB_LOOKP_TRANS -
CNVCF_SCWB_OBJATTR_COUNT - Get nbr of attribvutes per object type
CNVCF_SCWB_OBJATTR_READ - Get nbr of attribvutes per object type
CNVCF_SCWB_OBJATTR_READ_OLD - Get nbr of attribvutes per object type
CNVCF_SCWB_OBJL_FILL -
CNVCF_SCWB_OBJL_READ - Read Object List from systems
CNVCF_SCWB_RUNID_CREATE - Create run-ID
CNVCF_SCWB_RUNID_GETACTIVE - Get active run
CNVCF_SCWB_STAT_FINISH - Status
CNVCF_SCWB_STAT_INIT - Status
CNVCF_SCWB_SYSINFO_GET - Get system info
CNVCF_SCWB_SYSREL_GET -
CNVCF_SCWB_TDEMO_CONDITION - Condition for demo trigger
CNVCF_SCWB_TEMP_ACTION -
CNVCF_SCWB_TLIST_CONDITION - Condition for demo trigger
CNVCF_SCWB_UPDATE_SCOL - Update CNVC_SCOL_OR table from client 000
CNVCF_SCWB_ZLOG - FM for SCWB appl log
CNVCF_SHOWMESSAGE - Display message
CNVCF_SYSID - Liefert system-ID-String
CNVCF_SYS_INSTNO - Installationsnummer
CNVCF_ULINE - Uline
CNVCMIS_A_COLLECT_ARCHIVE - Collect archive analysis data
CNVCMIS_A_COLLECT_PRODHS - Collect Product Hierarchy Data
CNVCMIS_A_COLLECT_SDACCSEQ - To Collect Access Sequences
CNVCMIS_A_COLLECT_WFOBJECTS - Collect Workflow data
CNVCMIS_A_GET_OPTARCHIVE - Optical Archive Analysis
CNVCMIS_INST_LANGU_OUTPUT - SAP LT CT : Get Installed Languages detail from remote system
CNVC_CCE_GET_SELECTED_TABS - Get the list of tables selected for analysis
CNVC_CCE_GET_TABLES - Get Tables from the Remote system
CNVC_CCE_GET_TABLE_USAGE - Get usage details of specified customizing table
CNVC_CCE_UPDATE_USAGE_RESULTS - Update Usage results to remote system
CNVC_CCE_UPDATE_USAGE_STATUS - Update the Usage check status in the remote system
CNVC_SCWB_ADM - Trigger coding scan analysis
CNVC_SCWB_CHECK_EXCEL_SUPPORT - Liefert zurück, ob das aktuelle Frontend Excel unterstützt
CNVC_SCWB_GET_CVERS_INFO_BASIS - Get System Release Info
CNVC_SCWB_NAMESPACE - Namespace
CNVC_SCWB_REQUEST_CHOICE - RFC Module For Create Transport Request
CNVC_SCWB_TRIGGER_COMPARISON - SAP-LT Trigger SCWB Comparison from Work Center
CN_CLEAR_CUA_SAV - Clear GUI buffers (for page entries in task list)
CN_CL_MST_KEY_PROVIDE - NOTRANSL: Bereitstellung der Schlüssel von Ereignispunkten
CN_CL_P_MST_ALLOCATE - NOTRANSL: Zuordnung von Ereignispunkten zu einem Vorgang
CN_CL_P_MST_CONSISTENCY_CHECK - NOTRANSL: Konsistenzprüfung von Ereignispunkten
CN_CL_P_MST_DELETE - NOTRANSL: Löschen eines Ereignispunktes
CN_CL_P_MST_DELETE_BY_OPR - NOTRANSL: Löschen von Ereignispunkten
CN_CL_P_MST_LOAD_BY_OPR - NOTRANSL: Laden von Ereignispunkten zu vorgegebenen Vorgängen
CN_CL_P_MST_LOAD_BY_TSK - NOTRANSL: Laden von Ereignispunkten zu vorgegebenen Plänen
CN_CL_P_MST_PROVIDE_DATA_TABLE - NOTRANSL: Bereitstellen der Belegtabelle der Ereignispunkt-Zuordnungen
CN_CL_P_MST_REFRESH_DATA - NOTRANSL: Initialisieren der globalen Ereignispunkte Tabellen
CN_CL_P_MST_RESET_VALIDITY - NOTRANSL: Zurücksetzen der Parametergültigkeit
CN_CL_P_MST_SAVE - NOTRANSL: Sichern von Ereignispunkten
CN_CL_P_MST_SAVE_INFO_PROVIDE - NOTRANSL: Prüfung, ob Ereignispunkte zu verbuchen sind
CN_CL_P_MST_SUPPLEMENT_SAVE - NOTRANSL: Sichern von ergänzenden Daten zu Ereignispunkten
CN_CL_P_MST_UNLOAD - NOTRANSL: Entfernen von Ereignispunkten
CN_CL_P_MST_UPDATE_VALIDITY - NOTRANSL: Neubewertung der Ereignispunkte mit Parametergültigkeit
CN_CL_S_MST_CHANGE - NOTRANSL: Ändern eines Ereignispunktes
CN_CL_S_MST_COPY - NOTRANSL: Kopieren von Ereignispunkten eines Vorgangs
CN_CL_S_MST_CREATE - NOTRANSL: Anlegen eines Ereignispunktes
CN_CL_S_MST_CREATE_BY_COPY - NOTRANSL: Anlegen eines Ereignispunktes mit Vorlage
CN_CL_S_MST_DELETE - NOTRANSL: Löschen von Ereignispunkten
CN_CL_S_MST_HANDLE_PROVIDE - NOTRANSL: Bereitstellen von Handles anhand der Administrationsdaten
CN_CL_S_MST_INVALIDITY_PROVIDE - NOTRANSL: Bereitstellung der Ungültigkeit von Ereignispunkt-Zuordnungen
CN_CL_S_MST_LOAD_CHECK - NOTRANSL: Prüfung der Gültigkeit geladener Ereignispunkte
CN_CL_S_MST_LTEXT_CREATE - NOTRANSL: Anlegen des Langtextes zu einem Ereignispunkt
CN_CL_S_MST_LTEXT_DELETE - NOTRANSL: Löschen des Langtextes eines Ereignispunkts
CN_CL_S_MST_LTEXT_KEY_PROVIDE - NOTRANSL: Bereitstellung von Text-Schlüssel von Ereignispunkten
CN_CL_S_MST_LTEXT_PROVIDE - NOTRANSL: Lesen des Langtextes eines Ereignispunkts
CN_CL_S_MST_PROVIDE - NOTRANSL: Bereitstellung von Ereignispunkte
CN_CL_S_MST_PROVIDE_BY_FILTER - NOTRANSL: Bereitstellung von Ereignispunkten über Filterkriterien
CN_CL_S_MST_PROVIDE_BY_HANDLE - NOTRANSL: Bereitstellen eines Ereignispunktes durch Handle
CN_CL_S_MST_TGR_PROVIDE - NOTRANSL: Bereitstellung von Ereignispunkten
CN_CL_S_MST_TGR_PROVIDE_FILTER - NOTRANSL: Bereitstellung von Ereignispunkten über Filterkriterien
CN_CUA_DET_AND_SET - Determine and set GUI status
Return Table index